Beli cutter mill end di monotaro.id

Not only aluminum processing but also other non-ferrous metals, ordinary steel, alloy steel, etc.

Hy-Pro Endmill Hss-Co.8, 4 Flute Short With V Coating

TiAlN coating is a heat-resistant coating, suitable for high-speed cutting and alloy casting, austenitic steel, etc. and processing of castings and nonferrous metals. -Because of the gash type, the cutting edge strength is high and chipping resistance is excellent.

End Mill HSS-CO8 4 Flute 4x12x60mm adalah alat yang digunakan pada mesin milling atau frais sebagai alat potong material hingga terbentuk profil benda kerja yang didesain sebelumya pada gambar kerja. Pisau mesin frais ini mempunyai dimensi 60x8x8mm dengan ukuran diameter 4mm sehingga sangat cocok digunakan untuk proses milling dengan cepat dan effisien. Pisau mesin frais Krisbow sering digunakan di industri, pabrik, bengkel.

Supports all types of processing including shoulder milling, groove machining, copying, helical machining, ramping

HTD Hand Tap HSS with

Regular Series For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards. Available in 2 flute for maximum swarf clearance, 4 flute for maximum rigidity and 3 flute offers a combination of the advantages achieved with 2 and 4. Metric Tolerances Diameter: Over 1.00 ~up to 6.00. Tolerance: +0.000, -0.050 Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080

It's suitable for side milling of workpiece material from Steel and Stainless Steel to Aluminum.

It is a high end mill suitable for side machining and finish machining. Carbon steel, alloy steel, cast iron, aluminum alloy

Solid Carbide Flat Endmill, For Steel.

WXL coating with high hardness and high lubrication. Works on wide range of materials, regular steels, Copper alloys, Recommended with lubrcations or dry milling.

Negative relief ang., M class, 80deg rhombic insert, all-round chipbreaker for medium cutting

Metric - 12mm/Shank Diameter. Produces closed slots for woodruff keys to DIN 6888. For milling structural, carburizing and heat treated steel up to 900N/mm2. Manufactured to BS 122 : Part 4 : 1980. Made to DIN 850. Shank to DIN 1835/D. Metric Limits of Tolerances: Diameter +0.000 -0.127. Width 2 up to 4: - 0.014 -0.028; 4 up to 7: - 0.020 -0.038; 7mm up: - 0.025 -0.047.

T-Slot CuttersFor opening out the bottom of previously milled slot to form a T-slot.